Featured Discussions
Dear Mr\Mrs,
I tried to create a project starting of Modustoolbox for IAR embedded. Compiling is failing with this issue:
"Error[Li005]: no definition for "__iar_Initlocks" [referenced from C:\Users\emanuelebelpanno\mtw\Empty_PSoC4_App\Debug\Obj\TOOLCHAIN_IAR_13573725619442129044.dir\cy_clib_support_iar.o]"
I've tried to look for this function and it isn't present in the project. How Cam I solve this issue?
I'm using Windows 10, IAR embedded ARM 9.50.2.
Kind Regards,
EB
Show LessI have installed ModusToolbox 3.2 and wanted to create my first application using the USB on a XMC4500.
But I did not get far as the USB (device or host) is not in the list of peripherials. Why does Infineon not support the USB?
Does anyone have a working USB example for the XMC4500? I have tried using the USB driver supplied in the ARM/Keil µVision pack, but that does not work correctly and after 6 months the Infineon support has given up and closed my support case.
Can anyone help?
Show LessIn the end, the target array is still all zeros
smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/TRAVEO-T2G/cyt4fbb7-%E4%BD%BF%E7%94%A8mdma%E5%A4%8D%E5%88%B6%E6%95%B0%E7%BB%84%E6%B2%A1%E6%9C%89%E6%88%90%E5%8A%9F%E6%98%AF%E4%B8%BA%E4%BB%80%E4%B9%88/td-p/724114
Show LessDo I need to download special software to program the microcontroller XMC4400-F100K512 BA? Is DSP software programming code applicable?
smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/XMC/XMC4400-F100K512-BA/td-p/722645
Show LessIs there a Dave App function or XMC function available that enables the connection of two pins to each other?
1. When evaluating applications using SOA diagrams for MOSFETs, is the evaluation done using SOA curve diagrams for Tc &Rjc conditions or for Ta &Rja conditions.
2. Does this ID pulse value in the specification have anything to do with the pulse width time? Or does it mean that this value cannot be exceeded for all single pulse current peaks, regardless of the pulse width time?
smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/MOSFET-Si-SiC/MOSFET-SOA%E5%8C%BA%E8%AF%84%E4%BC%B0%E9%97%AE%E9%A2%98/td-p/723975
Show LessThis BTS7004-1EPP, the output is connected to the DC motor driver chip, and then to the motor, in that case, this RGND removed and directly grounded will work, right? Thank you!
smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/%E6%99%BA%E8%83%BD%E7%94%B5%E6%BA%90%E5%BC%80%E5%85%B3/7004%E6%8E%A5%E5%9C%B0/td-p/723932
Show LessHello,
We are currently working with the BGT60LTR11AIPE6327XUMA2,
We'd like to know if there's some high-level driver or some code examples that can help us to program this component
Best Regards,
Show Less
I am currently trying to get the openocd debugger to work on windows 11 on the superspeed explorer devkit, and i've followed what the guide showed, but i'm getting some halt related errors:
```log
Open On-Chip Debugger 0.8.0 (2014-12-03-15:43)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.sourceforge.net/doc/doxygen/bugs.html
Warn : Adapter driver 'cy7c65215' did not declare which transports it allows; assuming legacy JTAG-only
Info : only one transport option; autoselect 'jtag'
adapter_nsrst_delay: 200
jtag_ntrst_delay: 200
adapter speed: 1000 kHz
trst_and_srst srst_pulls_trst srst_gates_jtag trst_push_pull srst_open_drain connect_deassert_srst
RCLK - adaptive
adapter speed: 1000 kHz
Error: CyGetDeviceInfo failed
Info : clock speed 1000 kHz
Error: CyJTAGRead returned: 6
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: JTAG scan chain interrogation failed: all ones
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway...
Error: CyJTAGRead returned: 11
Error: fx3.cpu: IR capture error; saw 0x0f not 0x01
Error: CyJTAGRead returned: 11
Warn : Bypassing JTAG setup events due to errors
Error: CyJTAGRead returned: 11
Info : Embedded ICE version 0
Error: unknown EmbeddedICE version (comms ctrl: 0x00000000)
Info : fx3.cpu: hardware has 2 breakpoint/watchpoint units
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Info : accepting 'gdb' connection from 3333
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
undefined debug reason 7 - target needs reset
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: Target not halted
Error: Target not halted
Error: Target not halted
Error: Target not halted
Error: Target not halted
Error: Target not halted
Error: Target not halted
Error: Target not halted
Error: Target not halted
Error: Target not halted
Error: Target not halted
Error: Target not halted
Error: Target not halted
Error: Target not halted
Error: Target not halted
Error: Target not halted
Error: Target not halted
Error: CyJTAGRead returned: 11
Warn : target not halted
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: JTAG scan chain interrogation failed: all ones
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway...
Error: CyJTAGRead returned: 11
Error: fx3.cpu: IR capture error; saw 0x0f not 0x01
Error: CyJTAGRead returned: 11
Warn : Bypassing JTAG setup events due to errors
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Warn : srst pulls trst - can not reset into halted mode. Issuing halt after reset.
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: timed out while waiting for target halted
TARGET: fx3.cpu - Not halted
in procedure 'reset'
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Info : Halt timed out, wake up GDB.
Error: CyJTAGRead returned: 11
Error: timed out while waiting for target halted
in procedure 'halt'
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Warn : target not halted
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
Error: CyJTAGRead returned: 11
```
it never goes into my breakpoints (which are on the main function) and terminates the process.
My config:
The required devices are indeed visible in the usb control center:
Any idea on what i might've missed? I've followed this guide:
https://www.infineon.com/dgdl/Infineon-SuperSpeed_Explorer_Kit_User_Guide-UserManual-v01_00-EN.pdf
Hi Sir
we knew that there are two roaming way of 80211r , one is over-the-ds , the other is over-the-air.
Is it possible that disable over-ther-ds , and keep over-the-air function ?
Show Less