- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have a product (named 'DH-HT') using an FX2 device and TetraHub chip to provide a USB port for additional downstream devices. The FX2 chip is effectively downstream of its adjacent TetraHub chip. Another of these DH-HT units is connected to this additional downstream port. The DH-HTs are self-powered.
Using Windows7-x64 and an AMD chipset.
On the USB 2.0 ports, everything works as expected. If the upstream DH-HT is connected to the USB 3.0 port, it won't enumerate until the downstream DH-HT is switched on. A PC using the Renesas USB 3.0 chipset seems ok in the same situation.
Is anyone aware of this problem or have a solution?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I think we need to reproduce the problem to find out the exact reason for that behavior.
From your post, I understand that one DH-HT is HX2 + FX2LP.
I think we should be able to reproduce your problem with 2 DH-HTs… right?.
Also please let me know the host controller details where you are seeing this behavior.
Thanks,
Sai Krishna.