Segger JLink probe

[Anonymous]

Hello,

   

I want to trace and debug my project. As wrote in 'Programmers Manual.pdf' I need to use Segger JLink probe. Should I choose one of this tools http://www.segger.com/development-tools.html? Which tool is more suitable?

   

Thank you.

[Anonymous]

Hi,

       

Please download the required software from the following webpage:

   

http://www.segger.com/jlink-software.html

       

Thanks,

   

Sai Krishna.

[Anonymous]

 HI

   

This should be good enough: http://www.segger.com/jlink.html

   

Thanks

   

Nikhil

[Anonymous]

Hi Say Krishna and Hikhil,

   

As I understand, I need to buy J-Link tool http://www.segger.com/jlink.html and download and install this software http://www.segger.com/jlink-software.html to debug FX3 firmware.

   

Is it right? Please, correct me if it is something wrong!

   

Thanks,

   

Olga

[Anonymous]

Hi,

   

You are right Olga.

   

Thanks,

   

sai krishna.

[Anonymous]

 Olga 

   

There are other cheaper alternatives like Olimex ARM-USB-OCD-H.

   

Only that you will have to spend time to understand how to make it work with OpenOCD tool.  It is not as straight forward as using Jlink Segger.

   

The guidelines for using Olimes Jtag device are mentioned in the Programmer's manual of FX3 SDK 1.2.3.

       

Thanks

   

Nikhil

[Anonymous]

Hello,

       

I have one more question.

   

Can I debug my firmware sources without using any additional device?

       

Thank you,

   

Olga

[Anonymous]

 Hi,

   

You require JTAG probe for debugging.

   

-PRJI

[Anonymous]

Thank you!!!

[Anonymous]

No problem.

   

 As I mentioned there are cheaper alternatives to Jlink.

[Anonymous]

I have bought a Segger Jlink and downloaded the  software,when I trace and debug my project，the error occurred，how i do?

       

---