Firmware Upgrade Error Message - CY8CKIT-042-BLE - PSoC Programmer

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

I bought a Cy8CKIT-042-BLE last year when it first came out.

   

I was very excited to get the new BLE 4.2 adapter in the EX-BLE PRoC Eval Board (CYBLE-222014-EVAL).

   

After I plugged the board in to the PSoC Creator 3.3 software I get the error message:

   

KitProg version Expecting 2.16, but found 2.08. Please use PSoC Programmer GUI to upgrade firmware.

   

Question:

   

Where can I find the firmware upgrade files for the PSoC Programmer on the Cypress website ?

   

Thanks for your help !

   

Bob 

0 Likes
1 Solution
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

It is quite easy: the kitprog software is updated (nearly) automatically.

   

Start PSoC Programmer, actual version is 3.24.2, plug in the Pioneer kit and select it.

   

Open the "Utilities" tab and update,

   

Unplug, count to 42 and re-plug the kit. Could be that the USB-Driver gets updated.

   

 

   

Happy coding!

   

Bob

View solution in original post

0 Likes
9 Replies
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

It is quite easy: the kitprog software is updated (nearly) automatically.

   

Start PSoC Programmer, actual version is 3.24.2, plug in the Pioneer kit and select it.

   

Open the "Utilities" tab and update,

   

Unplug, count to 42 and re-plug the kit. Could be that the USB-Driver gets updated.

   

 

   

Happy coding!

   

Bob

0 Likes
Anonymous
Not applicable

Thanks Bob! your awesome solution was exactly what I needed - perfect!

   

Regards,

   

Bob (6LoWPAN on Cypress 4.2 BLE or bust!) Wilmes

0 Likes
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

You are always welcome, Bob !

   

 

   

Bob 😉

0 Likes

Sir I am facing the same problem of " Kitprg" upgrade  to 2.17. I done as per step suggested in this thread. I recently downloaded Creator 4, I am working in this software. After  upgrading in Programmer GUI it is successfully upgraded. But while programming in creator the pop-up comes for target selection and thereafter no error and nothing happens.Kindly help

0 Likes
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

Check if your project uses the same PSoC as the device selector shows.

   

 

   

Bob

Yes you are right sir. Thanks its working

0 Likes
Anonymous
Not applicable

Hello sir 

   

After All Your Suggested Steps i get another problem like :-

   

"The selected debug target 'CYBL10161-56LQXI' is not compatible with the project's selected device 'CYBL10563-56LQXI'."

   

I think The Device I Use CYBL10161-56LQXI  And the device i selected Is Different

   

Is There Any Way to Add My Device CYBL10161-56LQXI In Workspace To Use Exact Device.

0 Likes
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

Welcome in the forum, Ranjit.

   

Try Creator 4.0 SP1 -> Project -> Device selector and search for your device.

   

 

   

Bob

0 Likes
Anonymous
Not applicable

Thank You Sir That Problem Has Been Solved..

   

But Now When I Wont To Connect CY Smart App With My CYBL10161-56LQXI Device ,

   

Device Is Not Showing On CY Smart App,Is There Any More Configuration Setting .Because Im Not Using pioneer kit,

   

other debug notifications like ,

   

 

   

""Bluetooth On. Start advertisement with addr:00a0507d29ce.
Device is entered Limited Discovery mode.

   

Advertisement is enabled ""

   

The System Stucks Here,

   

Kindly Help Me..

0 Likes