- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
HI, I change the the device for PSoC 4 Firmware.zip from the CY8C4245AXI-483 to the CY8C4145AXI-483.I rebuild the project ,have many error.I has buyed the CY8C4145AXI-483, Can you give us the correct file of the PSoC 4 Firmware.zip for the CY8C4145AXI-483,I use two days but didn't change it to be good.My mail:705486026@qq.com,I thank you very much! The Below is the error an your web.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
1) You need to change the device that the bootloader is targeting from CY8C4245AXI-483 to CY84125AXI-483.
2) Your clock for SYCLK is too big; The CPU can only handle 24 MHz.
3) There is a warning for your UART RX clock being slightly off from tolerance, but probably acceptable.
4) cy_boot components prior to v4.2 may be unable to wake up from sleep/deep sleep due to defect.
5) It seems like a clock component under your SCB_P4_v99_0 component is broken from and older version port?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
1) You need to change the device that the bootloader is targeting from CY8C4245AXI-483 to CY84125AXI-483.
2) Your clock for SYCLK is too big; The CPU can only handle 24 MHz.
3) There is a warning for your UART RX clock being slightly off from tolerance, but probably acceptable.
4) cy_boot components prior to v4.2 may be unable to wake up from sleep/deep sleep due to defect.
5) It seems like a clock component under your SCB_P4_v99_0 component is broken from and older version port?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
HI,e.pratt_1639216,I want to need myFirmware.zip for CY8C4145AXI-483,but donnot need your advice。The advice had Already knowed by us,we donn't know how to change and caonnot find the error place. Pratt_1639216,if you donnot how to do,we think you not to answer,if you know how to do,please directly give me the myFirmware.zip for CY8C4145AXI-483,I thank you very much.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Ну, если вы хотите, чтобы кто-то выполнял вашу работу за вас, я бы рекомендовал нанять нового инженера для этой должности. В противном случае я собираюсь дать указатели, а не выполнять эту работу за вас.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Politeness is like an echo...
Bob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hey, e.pratt, I've heard from an American in Paris, but not yet in Russia 😉
Bob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Lol, I used to live close to Russia 😉
Currently living in US though.