Debug program error

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

Hello everyone..!

   

I have Windows 7 and on i want to build my program on the electronic card i got a error

   

okay .. on i click on Debug -> Program some window call's "select debug targat" i see ther card call's "PSoC3" on "FirstTouch"

   

on i clicking on the "PSoC3" i got a message on the right "this device was recognized. but PSOC creator does not support it at this time"

   

and on i put the "hand" on the "PSoC3" i see message : "this target device is already in use by another client"

   

 

   

Sorry about my bad english .. Thank you !! 🙂

0 Likes
1 Solution
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

Probably you are using a modern PSoC Creator version >2.0 and an outdated PSoC3 with an ES1 or 2 Silicon. This does not help you immediately, but you might try to download and install a lower Creator. Try to download from here http://www.cypress.com/?rID=39551 when your PSoC device is shown as ES (experimental silicon)

   

 

   

Bob

View solution in original post

0 Likes
11 Replies
lock attach
Attachments are accessible only for community members.
Anonymous
Not applicable

this is the photo ... I got a bug lest time

0 Likes
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

Probably you are using a modern PSoC Creator version >2.0 and an outdated PSoC3 with an ES1 or 2 Silicon. This does not help you immediately, but you might try to download and install a lower Creator. Try to download from here http://www.cypress.com/?rID=39551 when your PSoC device is shown as ES (experimental silicon)

   

 

   

Bob

0 Likes
Anonymous
Not applicable

 whare is the download ? 

0 Likes
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

Use the link in my above post and scroll down a bit. There are the download-links for Ctreator 1.0 up to Creator 2.0

   

 

   

Bob

lock attach
Attachments are accessible only for community members.
Anonymous
Not applicable

i installed and now i got this error :

   

[Photo]

0 Likes
lock attach
Attachments are accessible only for community members.
Anonymous
Not applicable

 And i cant see the Debug target

   

[photo]

0 Likes
Anonymous
Not applicable

 What is the version of PSoC Programmer you are using?

   

Is the device getting recognized in the Device Manager as a FTK (First Touch Kit)?

   

 

   

Why don't you try upgrading from FTK to -030 Kit? - Kit Upgrade Program

0 Likes
Anonymous
Not applicable

I have "PSOC 3 FirstTouch STARTER KIT"

   

How can i upgrade it ?! or use this 

0 Likes
Anonymous
Not applicable

 And the CYCKIT-003

   

How can i use this 

0 Likes
Anonymous
Not applicable

Hello, 

   

I already have this problem, Please HELP ME !

   

I have PSoC3 Firs Touch Starter KIT with CY8C3866AXI-040

   

I can't program my PSOC with Creator 2.1 or 3.0.

   

THANKS,

   

Laszlo

0 Likes
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked
        The upgrade-program for ES1 or ES2 silicone ended january this year, so you will have to use Creator 2.0 for programming ES-versioned PSoC3s   
   
Bob   
0 Likes