- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
running the sample program as indicated in : AN75320
Starting MAKE...
Solved! Go to Solution.
- Labels:
-
PSoC 1
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Please kindly follow this procedure.
- Uninstall PSoC Designer 5.4
- Delete the directory C:\Program Files\Cypress\PSoC Designer\5.4
- From the Start menu, select Run.
- In the Run window, type cmd.
- In the DOS window, type fsutil behavior query disable8dot3
- If the result is disable8dot3 = 0 you are done.
- If the result is disable8dot3 = 1, type fsutil behavior set disable8dot3=0.
- Reboot the computer
- Install PSoC Designer 5.4 in the directory C:\Cypress
- Reboot the system
- Create a new empty project and check the build process
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Bob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
//----------------------------------------------------------------------------
// C main line
//----------------------------------------------------------------------------
#include <m8c.h> // part specific constants and macros
#include "PSoCAPI.h" // PSoC API definitions for all User Modules
void main(void)
{
// M8C_EnableGInt ; // Uncomment this line to enable Global Interrupts
// Insert your main routine code here.
static unsigned int index;
LCD_Start();
LCD_Position(0,0);
LCD_PrCString("Hello World!");
LCD_Position(1,0);
LCD_PrCString("I am Alive!");
LED1_PWM_Start();
LED2_PWM_Start();
while(1)
{
PRT0DR ^= 0x02;
for(index = 0; index < 22000;index++);
}
}
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
please find the attached project.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
This issue is documented in a Knowledge Base Article, at the following link
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Please kindly follow this procedure.
- Uninstall PSoC Designer 5.4
- Delete the directory C:\Program Files\Cypress\PSoC Designer\5.4
- From the Start menu, select Run.
- In the Run window, type cmd.
- In the DOS window, type fsutil behavior query disable8dot3
- If the result is disable8dot3 = 0 you are done.
- If the result is disable8dot3 = 1, type fsutil behavior set disable8dot3=0.
- Reboot the computer
- Install PSoC Designer 5.4 in the directory C:\Cypress
- Reboot the system
- Create a new empty project and check the build process