Can we program a PSoC with FT232RL?

[alma_284856]

 Hi everyone,

   

I just want to now if a PSoC 3 can be programed with a FT232RL and if it is, could you give me documentations?
Because the miniprog 3 is not really cheap for studen project and use a CY7C68013A-56LFXC is not really popular as a FT232RL.

       

Than you

       

Alex

[Anonymous]

        These might be help   
PSoC1: http://www.cypress.com/?rID=2906   
PSoC3/5: http://www.cypress.com/?rID=81013   
PSoC4: http://www.cypress.com/?rID=57435   

[HeLi_263931]

Short answer: maybe.

   

Long answer: You will need a PSoC device preprogrammed with an UART bootloader. The FT232 is a USB-to-UART bridge. Maybe you meant the FT2232?

   

Alternatively, you can build a EZ-USB-FX1-based programmer by yourself: dangerousprototypes.com/forum/viewtopic.php . On the other hand, a FX2LP board is under 10$ on ebay. You won't get cheaper with a FTDI chip...

[alma_284856]

 Thank you guys 😄