Unable to connect to newer PSoC3 chips for programming

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
lock attach
Attachments are accessible only for community members.
Anonymous
Not applicable
        I have a custom PCB using CY8C3866LTI-30. I have some older chips that program correctly using the MinProg3. However all my newer PSoC chips will not program. In PSoC Creator 2.2 the "Select Debug Target" window is unable to port acquire the chip. There is a icon that changes when I remove the battery from the PSoC PCB (see attached images). I've tried multiple PCB's, checked for any shorts or breaks in traces. The chip is getting power and I'm able to see 1.8V output from the VCCA pin. What could be the cause of not being able to acquire the PSoC for programming?   
0 Likes
2 Replies
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

I would suggest you to create a technical "MyCase" to get a solution asap. To do so, click on "Support & Community" on top of this page and select "Create a MyCase".

   

 

   

Bob

0 Likes
ETRO_SSN583
Level 9
Level 9
250 likes received 100 sign-ins 5 likes given

There was just a programmer update release -

   

 

   

    

   

          http://www.cypress.com/?rID=38050

   

 

   

Check taht and its release notes.

   

 

   

Regards, Dana.

0 Likes