Look at the part number for PSOC, may be an older ES part, and only supported in
earlier Creator, 2.0,2.1, 2.2. You can find out in their respective release notes
when your part was no longer supported.
Thanks for the answer
Indeed this devkit contains CY8C3866AXI-040 ES2 which is not supported.
I solved this by not using this devkit anymore. Unfortunately I did allready do several hw modifications so I couldnt send it back to Farnell. I will now use a CY8CKIT-030A instead.
You might be able to get something for the kit on ebay if not too badly
hacked up. Just a thought. Alternatively yank the ES2 part off and replace.
I have seen some videos on youtube doing hi pitch smt with some fairly
simple methods, like flood a side with solder, and wick up excess/bridges
with solder wick.
Thanks, I will keep the board. Maybe I can use it in a later stage. I allready (destructively) removed the LCD to use these spots for my own hardware connection so selling wont be an option.
Creator 2.1 SP1 dropped support for ES2, from release notes -