FTK3270: Unable to Programming

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

Hi Friends,     

   

I'm trying to programming by FTK3270 programmer.     

   

It doesn't success.     

   

I'm use programmer 3.12 that used in FTK document.     

   

Besides, use device programmer from Designer 5.3, that make fatal error.     

   

I'm using recent programmer 3.18 usually.     

   

Any Informations do you have.     

   

Please advice for me. Thank you.     

   

     

            

   

                テキスト ボックス: --- Message from programmer --- Checksum Failed at 18:08:22   Device silicon ID                       

   

     

            

   

I had been trying to do Reset mode and Power-cycle mode,     

   

Neither same result.     

   

     

            

0 Likes
1 Solution
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

I had (some time ago) similar problems. What helped me out was a program that de-installed or deleted unused USB-devices. Found a free version on the web named USBDeview to be found here http://www.nirsoft.net/ 

   

 

   

Bob

View solution in original post

0 Likes
7 Replies
Anonymous
Not applicable

     

            

   

Contents of text-box of previous post     

   

--- Message from programmer ---     

   

Checksum Failed at 18:08:22             

   

      Device silicon ID "FF FF FF FF" is not in database, check Programming Mode     

   

Checksum Requested at 18:07:51       

   

Successful port connection for FirstTouch/1 at 18:07:49                

   

Open at 18:07:48  FirstTouch Programmer Version 1.80     

   

     

            

   

Programming Terminated at 18:07:13            

   

      Check Device Family/Device setting or Programming Mode     

   

      Target Device Silicon: FF, Family/Die: FF, Major Rev: O     

   

      does not match chosen Device     

   

      Is not in the database     

   

Programming Requested at 18:06:42             

   

Successful port connection for FirstTouch/1 at 18:06:37                

   

Open at 18:06:36  FirstTouch Programmer Version 1.80     

   

--- End ---     

   

     

            

   

I had been trying to do Reset mode and Power-cycle mode,     

   

Neither same result.     

   

     

            

0 Likes
Anonymous
Not applicable

Oh! Completed.     

   

I had installed into the NoteBook.     

   

At first Progammer3.12 can't do cause of Die-ID different.     

   

but Re-Build on Designer5.3 and programming by Parts-programmer.     

   

That's OK, No Problems.     

   

      

   

My desktop PC is Vista32bit, and NoteBook is Vista32bit also.     

   

I don't know why, Never mind. Thank you for listening.     

0 Likes
Anonymous
Not applicable

 seems like it wasn't properly acquiring the device.

Anonymous
Not applicable
        Yeah zeta-san, Many version of usb driver and programmer are there in desktop PC. so these are confusing which may use. anyway somewhere else can do programming, I'm OK. FTK is convenient for the USB-I2C Bridge. Thanks for your mention.   
0 Likes
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

I had (some time ago) similar problems. What helped me out was a program that de-installed or deleted unused USB-devices. Found a free version on the web named USBDeview to be found here http://www.nirsoft.net/ 

   

 

   

Bob

0 Likes
Anonymous
Not applicable

Yeah. Also, have you been able to get 2 versions of PSOC programmer installed?

Anonymous
Not applicable
        Hi Bob-san, zeta-san "Konbanwa" from Japan 21:20 Yes, I have many version of programmer, designer and creator also. Recently I found this archives. [http://www.cypress.com/?rID=2575] Because of when maintain old project which are needed still. E.g 26233! Thank you.   
0 Likes