PSOC5 lp device programming using USB

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable
    
     
      I am using CY8CKIT -050 kit for development of video streaming application from USB.     
     

I recently ordered this Board

     

When I plugged in the USB programming port J1 to PC using the cable provided with Kit, PC has enumerated device as DVKProg5/0000000001D1, and an unknown Device (ID: 0X2ba01477).

    
    

But as per the Psoc 5LP Device famaly, CY8C5868AXILP035 device has Device ID: 0X2E123069.

    

and the Programmer has identified the device but programing operation failed.

    

did anyone else faced this issue?

   
   

Why this Device is not identified.

0 Likes
7 Replies
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

I had (some time ago) a similar error that could be cured only with the help of cypress.

   

When de-installing (completely) and re-installing the whole Cypress software does not help (takes some time!) I would suggest you to create a mycase: At top of this page "Support&Community -> Technical Support -> Create a MyCase"

   

 

   

Bob

0 Likes
Anonymous
Not applicable

 I have tried removing and re-installing complete psoc development enviorment,

   

still I am getting same problem.

0 Likes
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

So you will have to create a MyCase.

   

 

   

Bob

0 Likes
Anonymous
Not applicable

This was a version problem.

   

The DVD which I reciever with CY8CKIT -005 has Psoc Creator 2.1. which doesnot supports Psoc 5lp devices.

   

I downloaded Psoc Creaor 3.0. now I am able to program device.

0 Likes
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

Congratulations and

   

Welcome in the fascinating world of PSoCs!

   

 

   

Bob

0 Likes
jizhc_300911
Level 1
Level 1

 I have the same issue, and I installed creator 3.0. I saw a problem device in the device manageer with USB2.0-CRW label. My computer is installed windows 8.1.

0 Likes
jizhc_300911
Level 1
Level 1

I downloaded the drivers.zip and put all the files into programer/3.19.1/driver folder, run the driver.bat. It is OK now.

   

But I have gotten the same problem at my old computer which is XP.

0 Likes