Flying PSoC4

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
lock attach
Attachments are accessible only for community members.
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

I was afraid that in a recent post I bit off more than I could chew when I promised HL a "PSoC 4 controlling a quad copter using Calman filters". So I started to build a proof-of-concept which is not ready yet but it turns out that it will really fit. A bit tight, using up most resources, but will fit. Not even Calman, but there is something even better.

   

 

   

The copter needs controlling 4 motors using a standard rc-interface (1ms to 2ms PWM) and as input a MPX sum-signal. RC-hobbyists know that interfaces.

   

When building a radio-controlled-device you will need something to easily control your RC-environmentTo get you acquainted to this matter (and my style of solving problems like that) I bult a device to control directly 4 servos with 4 potentiometers.

   

Project runs on Pioneer board or on KIT-049-42xx,

   

 

   

Bob

0 Likes
2 Replies
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

... and here is a logic-analyzer picture to proof it's working!

   

 

   

Bob

0 Likes
lock attach
Attachments are accessible only for community members.
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

... or is it here ?

0 Likes