- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I'm trying to use a UDB clock enable to create a gated clock for a bunch of shift registers and a counter.
The input clock (to the clock enable) is just a 1MHz clock generated by the PSoC. The enable signal is a control register bit. The output of the UDB clock enable *only* connects to the clock input of 6 ShiftReg_v2_30 blocks and a Counter_v2_40 block which has been configured to use UDB (not fixed function).
When I go to build the application, PSoC Creator explodes, saying "The UDB Clock/Enable components may only drive clocks in UDB content and \MyUDBEn:udbclkenable\ is connected to clk_en on \MyShiftReg:bSR:ClkEn\" -- the same error is repeated for what I am guessing is every register the clock enable output touches in each of the modules.
I do notice that some PSoC component blocks have a pink header and most have a green header, and I am guessing that that has something to do with why I can't get this to work.
On a more general note, what is the correct way to generate a glitch-free gated clock for PSoC components?
- Labels:
-
PSoC 5LP