Programing in the first time

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

Hi all,

As I known, in the first time of programing, we only have one way that we use our SDK or Loader.exe via HCI UART.That's right?

Can we use OTA to program our firmware in the first time?


0 Likes
1 Solution
MichaelF_56
Moderator
Moderator
Moderator
250 sign-ins 25 comments on blog 10 comments on blog

Correct.  You must use the SDK or Loader.exe to program the part for the very first time.

View solution in original post

5 Replies
MichaelF_56
Moderator
Moderator
Moderator
250 sign-ins 25 comments on blog 10 comments on blog

Correct.  You must use the SDK or Loader.exe to program the part for the very first time.

Anonymous
Not applicable

Thanks,

How about the OTA?

To use OTA to upgrade firmware, in the first time programing, we need to use SDK or Loader.exe to program a firmware that support OTA. And then we can use the OTA upgrade firmware?

0 Likes

My understanding is that OTA cannot be used for first time programming of the device.  I am asking around internally, and if I find out that my assumption is incorrect, I will report back.

Here's a good thread on first time programming: Re: Production Programming of BCM20737S

I confirmed today with the developers that OTA cannot be used for first time programming.

Anonymous
Not applicable

Thanks for your support!

0 Likes