- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Are these 2 kits compatible? I cant find anything in the documentation that says they are or how to configure.
If so does anyone have any specific information about them?
Thanks
- Labels:
-
PSoC 5LP
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Yes and no. The connector of the CAN/LIN board are compatible (mechanical and eletrical) with the ones on the -050 board. But the actual pin assignment differs, so you will need to adjust all the example projects.
Oh, and the -050 kit should have a PSoC5LP on it (which should be the case if its younger than 2 or 3 years). The PSoC5 has issues with CAN and it got disabled.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks.
Yes, I ran into the differing pin locations with the Segment LCD kit.
So I just need to report the pins.
I have 5 CY8CKIT-050 kits and most are less than 3 years old So they all should have PSOC5lp's.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Just check what chip is on the boards - it should have 'LP' in its number.