Programming over USB

Ask the Community
Close
Ask the Community
nav search Icon
Forums gray-arrow gray-arrow
Resources gray-arrow gray-arrow
About gray-arrow gray-arrow
Groups gray-arrow gray-arrow
nav-user Account

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob

Programming over USB

Anonymous
Not applicable
‎Aug 14, 2014 02:50 AM
‎Aug 14, 2014 02:50 AM

Hi,

   

We have been using the low speed CY7C63833 device in our product but needed to migrate to full-speed USB and so chose the CY7C64316 device. I have since realised that the programming pins are no longer shared with D+/- as they were in the low speed device. Is there any full-speed devices that share P1.0 and P1.1 with the USB D+/- ? Or am I stuck with having to program them using an additional connector? I haven't come across any in my searches.

   

Kind Regards,

   

Mark

0 Likes
Subscribe
1 Reply

Re: Programming over USB

AjayB_76
Moderator
Moderator
Moderator
100 sign-ins 10 questions asked 5 questions asked
‎Sep 18, 2014 02:11 AM
‎Sep 18, 2014 02:11 AM

 i just checked that we do not have any full speed devices which share the USB lines with the programming lines. I guess the converter is a good solution. Some of our devices have a USB bootloader which can help you bootload the USB  firmware.

0 Likes