two analog mux to one pin problem

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

Hi,

   

I want to connect two analog mux inputs to one pin. I see it is impossible. But maybe there is a trick to do it or similar effect?

0 Likes
6 Replies
lock attach
Attachments are accessible only for community members.
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

What does not work? See attached picture

   

 

   

Bob

0 Likes
lock attach
Attachments are accessible only for community members.
Anonymous
Not applicable

Hi Bob,

   

Thank you for the answer. I meant two analog muxes. Pls see the picture (an_mux.png). This configuration of muxes and their connections are impossible to route.

   

The best is same configuration but with the hardware muxes.

0 Likes
lock attach
Attachments are accessible only for community members.
Anonymous
Not applicable

sorry, I made a mistake with attached picture. pls see the right one.

0 Likes
ETRO_SSN583
Level 9
Level 9
250 likes received 100 sign-ins 5 likes given

I tried your case and the below, neither routed. Really choked the router,

   

took several minutes on my PC to fail.

   

 

   

You might file a CASE on this -

   

 

   

    

   

          

   

To create a technical case at Cypress -

   

 

   

www.cypress.com

   

“Support”

   

“Technical Support”

   

“Create a Case”

   

 

   

You have to be registered on Cypress web site first.

   

 

   

Regards, Dana.

   

 

   

0 Likes
Anonymous
Not applicable

Hi Dana,

   

Thanks. I did the support case just now.

0 Likes
ETRO_SSN583
Level 9
Level 9
250 likes received 100 sign-ins 5 likes given

You are always welcome !

   

 

   

Dana.

0 Likes