- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I am using Murata's SN8200 module and SDK-2.4.0. The board is configured as WICED_STA_DEVICE.
I am testing a modified version of tcp_async_server snippet. The server receives and sends packets to a client once in every 3 seconds. The data is not much (only 10 bytes per poll). The application was working fine for 2.5 continuous Days. Then after that the application gets hanged. I am not even able to ping it anymore. It completely stops working till a hard reset.
I faced this problem many times before. The application gets hanged after arbitrary time.
My problem is more or less similar to the following two posts . Only difference is my packet frequency is little less.
TCP server crashes if large amount of packets are being receaved
Hangup if quickly sending multiple requests to ping_webserver
I am using ThreadX + NetX_Duo build. Any help would be appreciated.
Thanks in Advance.
- Labels:
-
TCPIP
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Can you confirm if this happens with SDK 3.1.0?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
hi,
Thanks for reply. I am using Murata's SN8200. Murata has given patches which are only compatible with SDK-2.4.0.
So I am not sure the patches are compatible with SDK-3.1.0.
Are there some major changes in SDK-3.1.0 ? SN8200 has ARM-Cortex M3 and uses STM32F10x.
Thanks.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content