Anonymous
Not applicable
Jan 14, 2015
11:50 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jan 14, 2015
11:50 PM
Dear All:
I am pretty new to develop USB3.0 on Eclipse platform. after installed the FX3 development tools.
appling Cross ARM compiler for this project, choose arm926ej-s as the processor.
My processing : 1: New C++ project
2: import exsiting code
3: start bulding project.
4:
it fault to generate ELF file,
is there any thing worng with the setting?
is anybody can give me information for solve the such kind problem?
Thank you for visting my message.
compiler message as below
****************************************************************************************
11:59:36 **** Build of configuration Debug for project change ****
cs-make all
'Building file: ../cyfx3s_fatfs/cyfx3s_blkdrvr.c'
'Invoking: Cross ARM C Compiler'
arm-none-eabi-gcc -mcpu=arm926ej-s -mthumb -O0 -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -E -I"C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\firmware\u3p_firmware\inc" -MMD -MP -MF"cyfx3s_fatfs/cyfx3s_blkdrvr.d" -MT"cyfx3s_fatfs/cyfx3s_blkdrvr.o" -c -o "cyfx3s_fatfs/cyfx3s_blkdrvr.o" "../cyfx3s_fatfs/cyfx3s_blkdrvr.c"
'Finished building: ../cyfx3s_fatfs/cyfx3s_blkdrvr.c'
' '
'Building file: ../cyfx3s_fatfs/cyfx3s_fatfs.c'
'Invoking: Cross ARM C Compiler'
arm-none-eabi-gcc -mcpu=arm926ej-s -mthumb -O0 -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -E -I"C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\firmware\u3p_firmware\inc" -MMD -MP -MF"cyfx3s_fatfs/cyfx3s_fatfs.d" -MT"cyfx3s_fatfs/cyfx3s_fatfs.o" -c -o "cyfx3s_fatfs/cyfx3s_fatfs.o" "../cyfx3s_fatfs/cyfx3s_fatfs.c"
'Finished building: ../cyfx3s_fatfs/cyfx3s_fatfs.c'
' '
'Building file: ../cyfx3s_fatfs/cyfx_gcc_startup.S'
'Invoking: Cross ARM GNU Assembler'
arm-none-eabi-gcc -mcpu=arm926ej-s -mthumb -O0 -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -x assembler-with-cpp -I"C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\firmware\u3p_firmware\inc" -MMD -MP -MF"cyfx3s_fatfs/cyfx_gcc_startup.d" -MT"cyfx3s_fatfs/cyfx_gcc_startup.o" -c -o "cyfx3s_fatfs/cyfx_gcc_startup.o" "../cyfx3s_fatfs/cyfx_gcc_startup.S"
'Finished building: ../cyfx3s_fatfs/cyfx_gcc_startup.S'
' '
'Building file: ../cyfx3s_fatfs/cyfxtx.c'
'Invoking: Cross ARM C Compiler'
arm-none-eabi-gcc -mcpu=arm926ej-s -mthumb -O0 -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -E -I"C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\firmware\u3p_firmware\inc" -MMD -MP -MF"cyfx3s_fatfs/cyfxtx.d" -MT"cyfx3s_fatfs/cyfxtx.o" -c -o "cyfx3s_fatfs/cyfxtx.o" "../cyfx3s_fatfs/cyfxtx.c"
'Finished building: ../cyfx3s_fatfs/cyfxtx.c'
' '
'Building file: ../cyfx3s_fatfs/ff.c'
'Invoking: Cross ARM C Compiler'
arm-none-eabi-gcc -mcpu=arm926ej-s -mthumb -O0 -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -E -I"C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\firmware\u3p_firmware\inc" -MMD -MP -MF"cyfx3s_fatfs/ff.d" -MT"cyfx3s_fatfs/ff.o" -c -o "cyfx3s_fatfs/ff.o" "../cyfx3s_fatfs/ff.c"
'Finished building: ../cyfx3s_fatfs/ff.c'
' '
'Building target: change.elf'
'Invoking: Cross ARM C Linker'
arm-none-eabi-gcc -mcpu=arm926ej-s -mthumb -O0 -fmessage-length=0 -fsigned-char -ffunction-sections -fdata-sections -Xlinker --gc-sections -s -Wl,-Map,"change.map" -Xlinker --cref -o "change.elf" ./cyfx3s_fatfs/cyfx3s_blkdrvr.o ./cyfx3s_fatfs/cyfx3s_fatfs.o ./cyfx3s_fatfs/cyfx_gcc_startup.o ./cyfx3s_fatfs/cyfxtx.o ./cyfx3s_fatfs/ff.o
./cyfx3s_fatfs/cyfx3s_blkdrvr.o: file not recognized: File format not recognized
collect2: ld returned 1 exit status
cs-make: *** [change.elf] Error 1
11:59:37 Build Finished (took 1s.241ms)
*************************************************************************************************************************
My development evironment as below:
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
OS, win7_64bits personal
C/C++ Deveplopment tools 8.5.0.201409172108 Eclipse CDT
Eclipse Standard/SDK 2.0.1.20130919-0803
GNU ARM C/C++ Cross Compiler 1.12.1.201412191510 Liviu Ionescu
Zylin Embedded CDT 4.18.1 ZYLIN
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
1 Reply
Anonymous
Not applicable
Jan 15, 2015
08:29 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jan 15, 2015
08:29 PM
That's strange. Can you upload your project here? I'll take a look.