-
1. Re: LVDT Sensor measurement
robertt_ Nov 4, 2011 1:14 AM (in response to userc_41707)Hi,
what is your background and your application you are targeting? The block diagram from the EDN article give you a place to start. What kind of PSoC Starter Kit are you using? Giving advice is hard without knowing some of the basics.
Robert
-
2. Re: LVDT Sensor measurement
userc_41707 Nov 4, 2011 8:50 PM (in response to userc_41707)
Hi again.. I am from Indonesia, my background is civil engineering, and a few years ago I had attended Structural Health Monitoring System project (it was the first time in my country) which uses a common of sensor measurement system with LabView program & Measurement Studio, (but done by personnel from the U.S.).
Thanks..
as research this time i trying only with one type of sensor (LVDT), with the results of graphical view and text output (spreadsheet), according to the function of the LVDT itself when applied to civil engineering, particularly buildings and bridges.
I got many good examples of diagrams and code by using LabView, but then I saw (from example EDN), it seems pretty simple but effective (& cheaper, i hope).
You are correct that information from the EDN provides clear guidance to get started. but I am a beginner in programming like this, so what I mean here is perhaps a little example of programming code based on the example of EDN.
"maybe you do not need to give me the fish, but simply let me know, which is the good bait and where the right location for fishing"
-
-
-
5. Re: LVDT Sensor measurement
userc_41708 Mar 11, 2015 1:16 PM (in response to userc_41707)Has anyone out there got the LVDT conditioning to work with the psoc1 as described on the web?
If so I would like a little insite on how it was done.
-
6. Re: LVDT Sensor measurement
JoMe_264151 Mar 11, 2015 1:28 PM (in response to userc_41707)Welcome in the forum!
I am afraid that a 4 year old thread is rarely looked at. I know for sure that at least one of the posters is not connected to cypress any more.
I would suggest you to start a new thread preferrably in the PSoC1 forum.
Bob
-
-
8. Re: LVDT Sensor measurement
userc_41708 Mar 11, 2015 5:11 PM (in response to userc_41707)Thanks for the response Bob. I added a new post to the PSoc1 forum per your advice.
Dana, I appreciate the link. I need to find more detail.
I am new to PSoc and chose this route to try because of the LVDT idea.
-