Doubt in the usage of the Psoc 4 BLE Module

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

 Hello guys, I have a little doubt:

   

I planning to buy the CY8CKIT-042-BLE Pioneer Kit and I would know if I can use the BLE Pioneer Baseboard to program the Psoc 4 BLE Module and use this module (just the psoc 4 ble module) separated of the Baseboard in my application. I want to know if I have to use the Psoc 4 BLE module just with the Baseboard because in my application I have physical limitation and I want to use only the small components.

   

 

   

Sorry if it is a silly question.

   

 

   

Att,

0 Likes
4 Replies
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

You can get the PSoC4 BLE module separately and you just have to provide power to let the programmed module work. Have a look at the specs.

   

 

   

Bob

0 Likes
Anonymous
Not applicable

Thanks for replying, bob! But I need the baseboard to program the module, right?

   

 

   

 

   

att,

0 Likes
Anonymous
Not applicable

 You can use miniprog3 and connect the SWD lines of module to program PSOC4 BLE

0 Likes
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

You need a programmer to program the module. Full stop.

   

There are some different choices:

   

The KIT-baseboard. Plugs and sockets are not layed out for too often usage, so good for prototyping.

   

A separate KitProg: Snap-off part of the CY8CKIT-059. Can be connected with a cable.

   

MiniProg3: The professional solution. Target can be powered by MiniProg3 with 3.3V or 5V

   

 

   

Bob

0 Likes