- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Im having a bcm920737IBCN_REF board and i want to program it. Is there any user guide which helps me to do basic setup.
Initially we were using bcm20732 which we could do sample profiles.
Thanks,
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I'm not familiar with this eval board. The board that is supported with our latest SDK is the BCM92073X_LE_KIT TAG3 board. Would it be possible to obtain one of these boards from a franchised distributor?
I believe Macnica and Avnet show stock:
http://store.macnica-na.com/product-p/bcm92073x_le_kit.htm
If you are just starting a new design, I would suggest doing the development on SDK 2.x with the 20737 based TAG3 board. The 20732 requires a different evaluation board (TAG2) and SDK (SDK 1.x) and is somewhat limited in features supported.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I'm not familiar with this eval board. The board that is supported with our latest SDK is the BCM92073X_LE_KIT TAG3 board. Would it be possible to obtain one of these boards from a franchised distributor?
I believe Macnica and Avnet show stock:
http://store.macnica-na.com/product-p/bcm92073x_le_kit.htm
If you are just starting a new design, I would suggest doing the development on SDK 2.x with the 20737 based TAG3 board. The 20732 requires a different evaluation board (TAG2) and SDK (SDK 1.x) and is somewhat limited in features supported.