Electronic Enclosure

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

Hello everybody,

   

Is there any kind of standard enclosure for cypress Development Kits?

   

Thanks in Advance.

0 Likes
4 Replies
ETRO_SSN583
Level 9
Level 9
250 likes received 100 sign-ins 5 likes given

No generally. What boards are you interested in ?

   

 

   

Regards, Dana.

0 Likes
Anonymous
Not applicable

CY8CKIT-030

   

PSoC 3 Development KIT

0 Likes
ETRO_SSN583
Level 9
Level 9
250 likes received 100 sign-ins 5 likes given

I am not aware of any, maybe someone else knows of a

   

3'rd party solution./ Other than a simple box.

   

 

   

Regards, Dana.

0 Likes
lock attach
Attachments are accessible only for community members.

Hello,

I use the following enclosure for the CY8CKIT-030:

1599-open-with-battery.jpg

Hammond 1599KSGYBAT (ABS, gray)

L x W x H: 220 mm x 140 mm x 41 mm

www.hammfg.com

It can be purchased (for example) at RS Components (http://www.rs-online.com/ ) under the following article number: 741-7486 and costs around 13 US $.

I like it because it offers an optional 9V battery compartment and the whole CY8CKIT-030 (including its LCD) fits well inside, while still allowing some extra room for connectors, pushbuttons, etc.

First, I cut out a plastic sheet with the exact shape and mounting holes for the Hammond case (an empty or old PCB can be used for this purpose as well).
Then, I mount the CY8CKIT-30 on top of that empty sheet (or PCB) with 4 standoffs.

I hope this can help someone!