- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi guys,
I am confised about CY8CMBR3116 programmer. Can I program it with CY3217 or CY3210 mini programmer.
What is your suggest to program CY8CMBR3116.
Second question:
I know CY3210 mini programmer is old version. (CY3217 is new). But I want to use CY3210 to program CY8C21x34 (CY8C21434-24LTXI). It is possible?
Thanks
Solved! Go to Solution.
- Labels:
-
PSoC 1
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The miniprog3 for -
www.cypress.com/ Capsense user guide
www.cypress.com/ Programming specs
The Miniprog1 in the 3210 kit can program the CY8C21434-24LTXI
Regards, Dana.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The miniprog3 for -
www.cypress.com/ Capsense user guide
www.cypress.com/ Programming specs
The Miniprog1 in the 3210 kit can program the CY8C21434-24LTXI
Regards, Dana.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks Dana,
Your post explains everything clearer.
I want to ask you something. I will use cypress cpu(CY8C21434-24LTXI) and cypress CapSens(CY8CMBR3116). For improve hardware and software, I'm looking for the appropriate KIT. I saw this KIT - CY3280-BK1 Universal CapSense Controller - Baic Kit1(http://www.cypress.com/?rid=3475). Is it right decision? What is your suggest?
NOT:This KIT has CY3240-I2USB board and CY3210 MiniProg1 Programmer. I think I can program cypress cpu and cypres CapSens with these boards. Correct?
Thanks for your help
Regards.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Can you describe a little more about what the overall project functionality is ?
Its hard to make recomendations w/o knowing the overal goals. Reason I ask is
there is several families that have CPU + Capsense, like PSOC 4, 5LP, 3, 4M
that can also perform capsense. And do analog measurements, general CPU
control, serial links, graphic display control, so much more.
Regards, Dana.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks Dana. You are so helpful.
I am designing a touch panel. Touch panel will send button data with UART.(there will be 12 touch button). I intend to use Cypress CPU, for example CY8C21434-24LTXI. But if it will be so hard ro hardware and software desing, I can use CapSense Controller and Cpu.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Using a PSOC like the PSOC 1 familiy, or more recent PSOC 4 family,
is quite doable to handle both CPU and Capsense in one part. The PSOC
4 family has been recently expanded as well with PSOC 4M, which adds
DMA to the capability, as well as additional programmable hardware blocks,
UDBs. And the PSOC 4 BLE which brings Bluetooth wireless capability to
designs.
http://www.cypress.com/psoc4/?source=CY-ENG-HOMEPAGE&medium=Body-Products
http://www.cypress.com/psoc4ble/?source=CY-ENG-HOMEPAGE&medium=Body-Products
http://www.cypress.com/?id=5509
PSOC 4 element14.com
|
|