Port Acquire Failed

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

I'm sure there's a forum post about this already. However, whenever I Google this the links always take me to the cypress homepage, rather than the forum post.

   

I'm using the CY8CKIT-042-BLE and PSOC 3.1. When I go to select debug target, I'm greeted with "Port Aqcuire Failed". I have checked the cable and closed any application that may use the port.

0 Likes
1 Solution
Anonymous
Not applicable

Issue has been resolved. One of the jumpers came off.

View solution in original post

0 Likes
4 Replies
Anonymous
Not applicable

I have the same dev kit & PSoC with Surface Pro 3 Win8.1 I am getting the same error message when trying to 'Select Debug target'

0 Likes
Anonymous
Not applicable

I restarted the PC and PSoC was able to find the EZ-BLE dev kit.

0 Likes
ETRO_SSN583
Level 9
Level 9
250 likes received 100 sign-ins 5 likes given

I have found sometimes just unplugging the USB cable, then plug back in, windows renegotiates the connection successfully. Sometimes.

   

Other times driver needs to be un- installed, then reinstalled. If the firmware for the programmer / debugger got hosed that would need to be reinstalled. There are instructions in the user guide to do that.

   

 

   

Regards, Dana.

0 Likes
Anonymous
Not applicable

Issue has been resolved. One of the jumpers came off.

0 Likes