- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
BLE AlertNotification sample not working on CYBKIT-042 + PSoC BLE module.
I compiled it and downloaded it, it is broadcasting,
but Android 4.2 and 4.4 devices can't connect to it even though it can see the device.
On com port it says "Peer device doesn't support ANS".
I compiled and uploaded several other BNE_xxx programs, but not single sausage is working
with similar issues.
What gives?
All I want to do have a simple demo to turn LED on and off from an Android mobile.
(I intend to use the Arduino Bluethooth Android app to generate the on/off strings.)
It there is such a working demo sources out there (such as github) I go download it and get it working
just to get started with using the kit.
- Labels:
-
BLE
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Min Android version is 4.3 and BLE hardware is needed. Probably a bit new for older phones.
Bob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Bob,
Thanks for that. Client is looking at the CYBKIT-042 + PRoC which is working with CySmart Android app and the Android 4.4. It does the capsense and color triangle LED demo without problems. And then I get told (more like hammered 🙂 ) with that demo to reproduce it with the CYBKIT-042 + PSoC. Any sources for that demo or something like it for the PRoC so I can just get it past immediate hurdles? Otherwise we loose an order.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Which way do you want to make the communication between the two boards which do not have got a radio like the BLE versions.
Bob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Bob,
Not sure what that means. Too much of a noob.
The idea was that I have this simple Bluetooth app (Arduino Blutooth) that custom generates strings to send down a bluetooth link to turn lights on and off (plenty of demos on youtube using arduino modules doing this). So I was under the impression CYBKIT-042 + PSoC can do this. AlertNotification example seems to be designed to do a similar thing sending character codes which are then decoded and turned into LED activity. But its not connecting with Android 4.4. While PRoC demo does connect with the same Android 4.4 phablet (which indirectly implies hardware compatibility). The documentation carefully avoids describing PRoC and PSoC differences in small enough words to absorb details. Hence the visit here to get some insight to solve this demo example. If there are simple demos like this on github, I'm more than willing to download and try just to get something going.
Thanks.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
OK, I was irritated by the kit numbers you supplied. So you want to control some LEDs with ... whatever PSoC you need for that.
The Kit is named CY8CKIT-042 BLE
and consists of (just for the names) a -042 BLE Pioneer board and a PRoC dongle.
The pioneer board has got a PSoC4BLE chip which is equipped with a bit of internal hardware as Capsense, Timers, UDBs communication interfaces etc.
The PRoC BLE chip is equipped with only a very few internal hardware and has no CapSense which would be an easy interface to control the LEDs. For an initial prototype solution I would suggest to use two -042 BLE Pioneer boards. You can use the program sources for the dongle, the CapSense example, the LED control in a new mixture and program the two boards accordingly.
Bob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content