- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi all,
I'm pretty sure I have an issue with my emFILE libraries not linking in my project. I used the example that comes with creator and followed the datasheet here http://www.cypress.com/file/135136/download or rather the most up to date version of the emFILE datasheet (if that is not it).
I get the error that either the gcc or arm mdk libraries (i've tried both) are not found (the .a or .lib file). I have put the file and directory in the compiler>general, as well as the file and directory in the linker>general.
I know that when I was linking the CMSIS libraries before I had to add a "-lm" to the command line option in the linker, is ther a similar thing I must add here? I have tried "-lm" but it just caused other errors as well as library not found.
any help would be appreciated as I am stumped.
thanks,
scarslon
- Labels:
-
PSoC 5LP
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
So turns out I confused the ARM MDK instructions with the GCC instructions. when adding the library in linker>general> you must make sure to remove the lib and .a parts of the file name...
hope this helps someone