- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I would like to know if in the PSoC® 4 BLE if the host part could be disable and use the device just as a BLE controller (Link Layer only). I have a host in a second device and it expects to communicate with the controller via HCI.
Solved! Go to Solution.
- Labels:
-
BLE
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Yes.
Use the DTM mode from the BLE Component. The controller can then be accessed over UART using the HCI commands. The PSoC_4_BLE_DTM/PRoC_BLE_DTM example projects in the BLE Pioneer kit content (www.cypress.com/CY8CKIT-042-BLE) demonstrates this. Refer the user guide of the kit for more details.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Yes.
Use the DTM mode from the BLE Component. The controller can then be accessed over UART using the HCI commands. The PSoC_4_BLE_DTM/PRoC_BLE_DTM example projects in the BLE Pioneer kit content (www.cypress.com/CY8CKIT-042-BLE) demonstrates this. Refer the user guide of the kit for more details.