1 2 Previous Next 15 Replies Latest reply on Feb 25, 2016 8:46 AM by JoMe_264151

    PSoC Creator 3.3 Slow

    userc_39431

      Hi,

         

      After upgrading PSoC Creator to version 3.3 it slowed down significantly. After any edit like adding an existing item, scrolling through a schematic file or source files or even writing a single line of code causes program to hang for about 2-3 seconds. I use Win7 64-bit. I also tried it with Win10, still the same problems. 

         

      BR,

         

      Necdet

        • 1. Re: PSoC Creator 3.3 Slow
          JoMe_264151

          Check for non-ascii characters in path or username, avoid files on network. Seems as if re-installation does not work?

             

           

             

          Bob

          • 2. Re: PSoC Creator 3.3 Slow
            user_352646

            Hi, I'm facing the same problem.

               

            the early access Creator 3.3 SP1 is better. But still the system is not responding smoothly.

               

            I uninstalled all PSOC SW and reinstalled, nothing changed.

               

            Metin

            • 3. Re: PSoC Creator 3.3 Slow
              userc_39431

              Unfortunately reinstallation doesn't work. No files on the network. I will check the path and username but there was no problem in v3.2.

              • 4. Re: PSoC Creator 3.3 Slow
                userc_39431

                Still no improvements. Sometimes I get the following error when it slows down and the program crashes.

                   

                Problem Signature:
                  Problem Event Name:    APPCRASH
                  Application Name:    psoc_creator.exe
                  Application Version:    0.0.0.0
                  Application Timestamp:    55f3682d
                  Fault Module Name:    libclang.dll
                  Fault Module Version:    0.0.0.0
                  Fault Module Timestamp    555cb825
                  Exception Code:    c0000005
                  Exception Offset:    00021a27
                  OS Version:    6.1.7601.2.1.0.768.3
                  Locale ID:    1055
                  Additional Information 1:    0a9e
                  Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
                  Additional Information 3:    0a9e
                  Additional Information 4:    0a9e372d3b4ad19135b953a78882e789

                • 5. Re: PSoC Creator 3.3 Slow
                  JoMe_264151

                  Get help from Cypress directly: At top of this page Design Support->Create Support Case and tell what you already have tried.

                     

                   

                     

                  Bob

                  • 6. Re: PSoC Creator 3.3 Slow
                    mattl_01

                    For those having performance issues, did you install from CD or directly download from the web?

                       

                    --Matt

                    • 7. Re: PSoC Creator 3.3 Slow
                      userc_39431

                      Hi Scott,

                         

                       

                         

                      I did what you said and I cannot see 3.3 installed.

                      • 8. Re: PSoC Creator 3.3 Slow
                        scotta_91

                        Necdet,

                           

                        Please contact me directly via email.  kin@cypress.com I'll help you get this resolved.

                        • 9. Re: PSoC Creator 3.3 Slow
                          scotta_91

                          Necdet and Metin,

                             

                          So during the Creator install, the .Net Optimization Service (NGen) is supposed to run on all of the .Net assembles for Creator.  There is a possibility that it did not run in your cases.  If so, I can help you run the optimization tool by hand to see if that helps.

                             

                          It turns out it is fairly easy to check for the Ngen assemblies.  Open a console Window.  (Hit the Start key and type cmd<enter> or hold shift, right click on a folder and select "Open command window here".)  Enter the following:

                             

                          %windir%\Microsoft.Net\Framework\v4.0.30319\ngen.exe display psoc_creator

                             

                          You should see something like this:

                             

                             

                          If you don't see your 3.3 install listed, then please let me know.  The .Net folder may be named differently, so the command may be different.

                             

                          • 10. Re: PSoC Creator 3.3 Slow
                            sugac_1424126

                            I am getting the error as

                               

                            Error: The specified assembly is not installed

                               

                            Please find the attachment.

                               

                            I order to achieve the speed in PSoC Creator 3.3 I have reduced the animation of my PC.

                               

                            I have windows configuration of 
                            4GB RAM,
                            2.9GHz Intel Pentium (R) Processor
                            32-bit OS Win7
                            500GB Hard-drive where C-drive has 70GB free memory.

                            • 11. Re: PSoC Creator 3.3 Slow
                              sugac_1424126

                              Hey Guys , Good news.

                                 

                              After I got fed up of slow operation, I tried to un-Install the PSoC Creator 3.3, during initialization of Uninstalling process I tried to have a another shot by giving repair...

                                 

                               

                                 

                              WOW... ITs perfectly working smooth with out any lag.

                                 

                               

                                 

                              @ necdetalpmen_1437776 Try to give repair. I hope your problem will be solved.

                              • 12. Re: PSoC Creator 3.3 Slow
                                kep_284046

                                Hi,

                                   

                                I have a similar problem. PC_3.3 is very very slow. 

                                   

                                I tried this command, but similar it has failed. Can i solve this problem? Please help me

                                • 13. Re: PSoC Creator 3.3 Slow
                                  userc_39431

                                  Hi,

                                     

                                  Scott contacted me and we solved the problem. It was something about Turkish characters.

                                  • 14. Re: PSoC Creator 3.3 Slow
                                    userc_40645

                                    Hi,

                                       

                                    I'm living same problems. Computer is halting for a while on every modification or action.

                                       

                                    I'm getting "Error: The specified assembly is not installed" message, when I try the "ngen" command.

                                       

                                    (To Scott or anyone who knows solution): Please could you share solutions(s). 

                                       

                                    Especially about Turkish characters.

                                    1 2 Previous Next