- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello every one: I am coding for LCD TFT 3.3 ILI 9341 use Psoc5Lp, My proplem is wrong color of image when display it on LCD. Image is blurred, image not incorrect.
Please see file of me (project and image ).
Please help me!
Solved! Go to Solution.
- Labels:
-
PSoC 5LP
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Probably you don't transfer the image data as the display expects. Check with the data sheest that the color data is in the correct order ( both bit-order, byte-order). Check the wiring of the databus, maybe you switched some bits.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Probably you don't transfer the image data as the display expects. Check with the data sheest that the color data is in the correct order ( both bit-order, byte-order). Check the wiring of the databus, maybe you switched some bits.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello hli. can you see my code?, I am try my best but i dont do that.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Since I don't have any experiences with that particular controller, I did not look at the code. I just drew some conclusions from what the picture looks like (ans looks like the bit order of the color data is wrong).
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi sonnv11
I am looking on your schematic and code 😉
Is there a specific reason you are trying to get the timing together by yourself?
I have the same display controler running here and I am using the Graphic LCD Interface block from Cypress.
Have a look at the attached sample project which also has the required initialization.
I have transfered an Arduino library to PsoC and in that sample there are some routines to draw some primitives (working) and picture load from SD which I did not try / use
Maybe this examples help you a bit further!?
All the Best
Frank
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank so much hli, Because your suggestions help me fix errors. Have some capacitor in data bus, i break them then it work well, my code is true.
Thank for franksanderdo. I will use your project in next my project.