- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I get the following errors while compiling a project that contains a bunch of outputs and inputs, a UART component and a bootloadable component. The project bundle is attached.
This is the error I get.
Build error: address 0x9ba2 of .\CortexM0\ARM_GCC_493\Release\CY8CKIT-049-42XX_VGA.elf section `.text' is not within region `rom'
Build error: .\CortexM0\ARM_GCC_493\Release\CY8CKIT-049-42XX_VGA.elf section `.eh_frame' will not fit in region `rom'
Build error: section .cyloadablemeta loaded at [00007fc0,00007fff] overlaps section .text loaded at [00006a00,00009ba1]
Build error: region `rom' overflowed by 0 bytes
Now when I remove the bootloadable component there is no error, after a sucessfull build I paste the component back again, and then re-build, this time there is no error.
This happens after every three or four builds.
Please suggest a solution.
thanks
a
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Probably your path to the bootloader addresses a wrong file. The mention of "Release" in the error message makes me suspicius.
Another hint: You are not using the latest Creator version (3.3 CP1), there are updates for some components available.
Bob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks Bob,
its working now, I updated the creater to the latest version, then changed the build to Debug instead of Release, also there was a problem with bootloadable component setting, the hex file being addressed was wrong.
Now its working perfectly, the build time is also fast
thanks
a
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You are always welcome, a.
Bob