Anonymous
Not applicable
Feb 05, 2016
02:01 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 05, 2016
02:01 AM
In AN65974,It says a three-cycle latency for the dedicated flag is always incurred at the end of the transfer,The three-cycle latency is from the write cycle that causes the buffer to become full to the time the flag is asserted low.Now i design a GPIF state machine, and use IN_DATA action,DMA_RDY_TH0 transition.
does the DMA_RDY_TH0 has latency? when I use DMA_RDY_TH0 and DMA_RDY_TH1 as state transition between IN_DATA with two threads, it seems some data lost.
1 Reply
Anonymous
Not applicable
Feb 07, 2016
10:10 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 07, 2016
10:10 AM
Hi,
Yes. DMA_RDY_THx also has the same latency as the flags. They should be used only to ensure if the DMA is actuallu ready or not, and do not indicate the exact moment at which the DMA becomes full / empty.
Regards,
- Madhu Sudhan