3 Replies Latest reply on Feb 12, 2016 9:45 AM by user_1377889

Debouncers and Click types

dturney_1462731 Aug 18, 2017 3:16 PM

I'm working with BLE and trying to use Debouncer, along with PWM, to take a bus of inputs (buttons) and individually debounce them, run them through a onClick timer, and process the events as a click, a double-click (another single click before an alloted time, and a held-down button. I've looked at the Keypad software debouncing, and the components, but the problem, other than not having a set of specific events, is that for my application, I'm out of blocks, so I need to use TCPWM. In the future, I'd like to make it into a component as well. Any direction would be appreciated. As of now I do have a modified Keyboard/keypad matrix code that does provide the events and the button, but I'm hoping to develop it further, and hopefully using less resource.

1. Re: Debouncers and Click types

user_1377889 Feb 12, 2016 2:43 AM (in response to dturney_1462731)

Have a look into this thread introducing a matrix keypad component.

Bob
Like Show 0 Likes(0)

Actions
2. Re: Debouncers and Click types

dturney_1462731 Feb 12, 2016 6:23 AM (in response to dturney_1462731)

I did and it's awesome! I've modified it to return which button and a Open, Click, Double-Click, Held, Released 'Button' type, since my app only uses 2-5 buttons, and not really in a matrix. The problem, with my app components needs, however, is that I've gotten to many 'Pre-Configured Blocks' , so I was hoping to switch out the Debounce_Timer with a TCPWM and hopefully solve that.
Like Show 0 Likes(0)

Actions
3. Re: Debouncers and Click types

user_1377889 Feb 12, 2016 9:45 AM (in response to dturney_1462731)

It is always a good idea to have a general timing mechanism. It is quite easy to use that for several different timing purposes.

Bob
Like Show 0 Likes(0)

Actions

Go to original post