- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello All,
I made the schematic for my first cypress project but have some errors which im not able to find which i have attahced. It seems the error may be in LPCOMP and ADC connections to external pins. Sorry for my nusance, 1st project it is.
Thanks
Ashutosh
Solved! Go to Solution.
- Labels:
-
BLE
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The two information messages just preceiding the errors are the cause. You have used the (dedicated) pins for the LPComp by your UART.
First approach I usually take is to set all pins to <auto assign...> and let the fitter choose.
When you got stuck it is always advisable to post your complete project, so that we all can have a look at all of your settings. To do so, use
Creator->File->Create Workspace Bundle (minimal)
and attach the resulting file.
Bob
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The two information messages just preceiding the errors are the cause. You have used the (dedicated) pins for the LPComp by your UART.
First approach I usually take is to set all pins to <auto assign...> and let the fitter choose.
When you got stuck it is always advisable to post your complete project, so that we all can have a look at all of your settings. To do so, use
Creator->File->Create Workspace Bundle (minimal)
and attach the resulting file.
Bob