wireless system using CY8c 049 kit ?

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

Hello

   

I need to develop wireless system that should be transmit serial data from  PSoC4 to my PC.

   

Is it possible with xbee module. please guide me 

0 Likes
7 Replies
lock attach
Attachments are accessible only for community members.
rola_264706
Level 8
Level 8
50 likes received 25 likes received 10 likes received

Vead: here is your program. I have updated it to Psoc Creator 3.3 SP1. It is for the Xbee and should work. I don't have an  Xbee module so I can't try it out. 

0 Likes
lock attach
Attachments are accessible only for community members.
Anonymous
Not applicable

look at module Is it type of module that can be interface with psoc4 ?

0 Likes
rola_264706
Level 8
Level 8
50 likes received 25 likes received 10 likes received

I didn't change the device to the 049. It uses a 4200 Pioneer kit.

0 Likes
lock attach
Attachments are accessible only for community members.
rola_264706
Level 8
Level 8
50 likes received 25 likes received 10 likes received

Here is the program with the CY8CKIT-049-4200 device.  Change the dependencies to agree with your system.

0 Likes
EvPa_264126
Level 7
Level 7
500 replies posted 250 replies posted 100 likes received

at your pictured CC2500 module
A little bit of this module in this topic

0 Likes
rola_264706
Level 8
Level 8
50 likes received 25 likes received 10 likes received
        It looks like TI has a test program for this part and it displays the code and if you installed it . You could then place this code into your program. I think the Xbee program was based on a UART code not SPI. I'll check it and see. This device is much more complex than the orginal Xbee so it looks like it will take some time to get it too work.   
0 Likes
Anonymous
Not applicable

yes I tried but I don't understand how to interface that zigbee module to Psoc 4 kit.  Zigbee module can be receive or transmit data  so can we send or receive data from PC to Psoc4

0 Likes