Which Template to use in psoc creator 3.2 to blink the LED on the base chip

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
lock attach
Attachments are accessible only for community members.
Anonymous
Not applicable

I have the CY8CKIT-042-BLE Pioneer Kit. Originally, I had the 3.3 version, and the setup page for creating new projects was new and strange to me. Then I switched to 3.2, and there is still no such an option for the "PSoC 4 Design". What should I do? Go for lower version or 3.2 is okay but I just didn't see the option? The attached is the setup page I have. Thanks!

0 Likes
1 Solution
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

Welcome in the forum!

   

I strongly suggest you to use Creator 3.3, do not be afraid of new improvements!

   

Select your hardware as shown in the picture

   

 

   

Bob

   

View solution in original post

0 Likes
2 Replies
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

Welcome in the forum!

   

I strongly suggest you to use Creator 3.3, do not be afraid of new improvements!

   

Select your hardware as shown in the picture

   

 

   

Bob

   

0 Likes
HeLi_263931
Level 8
Level 8
100 solutions authored 50 solutions authored 25 solutions authored

Note that most of these selections show only when the corresponding software from the kits page at cypress.com is installed.

0 Likes