- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi !
Are it`s possible that my BLE Device will work as Observer and wait to SmartPhone in area. After it`s founded it swap to advertising and make connection ?
Solved! Go to Solution.
- Labels:
-
BLE
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Yes this is possible. In the BLE Component. you need to select the GAP Role as "Central and Peripheral". Now you will be able to perform scanning (observing) or advertising and establishing connection.
There is an example project for this in our Blog. The example project is for a GAP Central + Peripheral that does Adv, scanning (observing), connection establishment, connection parameter updated etc.,
Please refer project # 12 in the following link. It also comes with documentation.
https://github.com/cypresssemiconductorco/PSoC-4-BLE/tree/master/100_Projects_in_100_Days
Regards,
- Madhu Sudhan
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Yes this is possible. In the BLE Component. you need to select the GAP Role as "Central and Peripheral". Now you will be able to perform scanning (observing) or advertising and establishing connection.
There is an example project for this in our Blog. The example project is for a GAP Central + Peripheral that does Adv, scanning (observing), connection establishment, connection parameter updated etc.,
Please refer project # 12 in the following link. It also comes with documentation.
https://github.com/cypresssemiconductorco/PSoC-4-BLE/tree/master/100_Projects_in_100_Days
Regards,
- Madhu Sudhan
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Ok, I`l check.