Can I get I/Q signal from this BLE module?

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

Hello there.

   

I am now searching the RF IC which outputs I/Q signal to get phase data for calculation.
It would be common for this purpose to use I/Q demodulator and microcontroller,
but these are too expensive to use for mass production.

   

I am searching widely used IC which outputs I/Q signal and inexpensive.
I know a few IC which outputs I/Q signal, but I can't find it because there is no description about it in datasheet.
Moreover, it also needs microcontroller.

   

So, PSoC is the best if RF part of it outputs I/Q signal by reason of  single chip configuration.
Though I can't find setting to output I/Q signal from this BLE module used in PSoC Creator.

   

Are there any PSoC and RF module which I can get I/Q signal and calculate phase value ?

0 Likes
1 Solution
Anonymous
Not applicable

Unfortunately, I qnd Q signals are not brought out to Pins. Could you describe the requirement a bit detailed?

View solution in original post

0 Likes
2 Replies
Anonymous
Not applicable

Unfortunately, I qnd Q signals are not brought out to Pins. Could you describe the requirement a bit detailed?

0 Likes
Anonymous
Not applicable

Hi.

   

Please let me confirm the meaning of output at first.
It dosen't mean that I/Q signal outputs from PSoC physical pins.
I only would like to get the I/Q signal from RF part in order to
 calculate at microcontroller part in PSoC.

   

What I want to do is send BLE signal with nonhopping mode,
and receive it using this PSoC to get both TOF data and Phase data
at the same time.

   

Hence,I am now serching inexpensive BLE module which can send signal
with nonhopping mode and receive signal with I/O output.

0 Likes