- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I'm working with Scanning and Advertising to addresses in the white list. A lot of functionality will be handled through data provided in the advertisement packet, which, before looking into using a white list, I had solely relied on for filtering unnecessary scanned devices before invoking the rest. I have a few questions about implementing:
1) The datasheet says there can only be up to 8 devices on the list. In one part of the application, I want my potential max white listed devices to be 24. Its a toggling function, so I just need to advertise just long enough for the device to get it, then it'll switch to a new data packet. What's a good, efficient and quick, way to run through those 24 devices?
2) Is there a way to "blacklist", or a way to advertise only to addresses that, for example, only have the same 3 CompanyID bytes in their address?
Thanks for any direction anyone has.
Solved! Go to Solution.
- Labels:
-
BLE
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
You have to use the AddDevicetoWhitelist and RemoveDeviceFromWhitelist APIs repeatedly to achieve this. Also, it is not possible to blacklist that way.
Regards,
-Madhu Sudhan
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
You have to use the AddDevicetoWhitelist and RemoveDeviceFromWhitelist APIs repeatedly to achieve this. Also, it is not possible to blacklist that way.
Regards,
-Madhu Sudhan