- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I have trouble finding how to either manually import-export some text-file format and/or programmatically set/get the pin config in a PSoC Creator project.
Two use-cases:
- To support several board-designs running the same software, easily be able to maintaing several pin-configuration mappings (kind of like a device-tree on linux)
- When doing PCB Sch&Layout, during pin-swapping, I want to be able to push the netlist back & forth to PSoC Creator to check that it's a viable pin-swap. This is very tedious to do manually by entering the pins in the window shown below.
Thanks David
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello David,
Currently there is no method to change the pin configuration other than from CYDWR. For every pin change the analog/digit routing algorithm has to be rerun.
So one thing you can do is to have multiple project build for different pin configuration.
Thanks
JOBIN GT
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello David,
Currently there is no method to change the pin configuration other than from CYDWR. For every pin change the analog/digit routing algorithm has to be rerun.
So one thing you can do is to have multiple project build for different pin configuration.
Thanks
JOBIN GT