- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dear all,
Can anyone tell me how the procedure looks like to port an application, created on a CY8CKIT-042-BLE and a CY5671 PRoC module to an application, running on a CY8CKIT-042-BLE and a CYBLE-022001-EVAL module?
Thank you!
- Labels:
-
BLE
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Well the CYBLE-022001 EVAL module has less resources that the CY8CKIT-042-BLE. There is a chart that gives you that gives that information.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you for the answer. I know that the EZ-BLE module has less pins, but they are sufficient for the application. What would I need to change in the application in the PSoC Creator?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I don't have your program so I can't determine all of the issues. But the first thing is to click on The Project Tab and select the device selector and select the device on your module and then PSOC Creator will flag the changes you need to make in your program. You will also need to rebuild the program and see if it flags anything.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
If you are trying to get the demo that controls the RGB LED Color ,
Two problems
1. PRISM Module is not supported
2. The RED LED is of the RGB is not connected.
I would just like a blink the LED demo.