Problem in Idac

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
lock attach
Attachments are accessible only for community members.
chmoc_1567941
Level 4
Level 4

i attached my project.

   

i cant got current output on my decided pin.

   

can you tell me where i did mistake???

   

i got only 0.1uA current for any value of idac.

0 Likes
3 Replies
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

Check in your underlying hardware schematic file to see whether the chosen pin is in use for something as I2C.

   

I strongly recommend to update Creator to latest version and to update the components of your project to latest.

   

 

   

Bob

0 Likes
lock attach
Attachments are accessible only for community members.
rola_264706
Level 8
Level 8
50 likes received 25 likes received 10 likes received

Your clock for the PWM is too slow should be 12  Mhz.  The Led pin doesn't need the external terminal  checked  in config. file for the pin. Here is your program with changes.  I am running PSoC Creator  3.3 CP3 (3.3.0.9604) As Bob suggested please upgrade to the latest software.

0 Likes
lock attach
Attachments are accessible only for community members.
rola_264706
Level 8
Level 8
50 likes received 25 likes received 10 likes received

Here is another program with high resolution.

0 Likes