- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I'm working off of the 100 Days OOB example, with the addition of storing the bond on the client end. I have the configuration on the peripheral side pretty much the same: Auth+Encrypt, Keyboard+Display, No Bonding. On the Central Side, I've started with it the same, connection and paring went well, but when it came to storing the Bond, my API results came back ok, but when I pulled the data to confirm, my bond count came back as 0. I've changed the IO from Display to Display+Keyboard and Display+Yes/No with no change. I'm using a 128k device and have attempted the Storing and Retreiving both while connect and after disconnecting with no luck. Any ideas of why?
- Labels:
-
BLE
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Could you share your project with us? We will try to look into the issue.
You might as well create a technical support case. You can visit http://www.cypress.com/support and create a case there. Engineers from Cypress will help you out.
Regards,
Sujay