- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
can me sombody help, please...?
When I call the function to connect: CyBle_GapDisconnect(), the first ble module started to connecting. The second ble is switched off.
The first module ist in the state: CYBLE_STATE_CONNECTING a try to connect to second module (its switched off). My problem is,
that first module is try to connect about 30s. I need to decrease this the time (for example 10s), but where?
The setting in the connection parameters: min time is set to 7.5ms, max to 30ms, supervision timeout: 1000ms.
Thank you
Solved! Go to Solution.
- Labels:
-
BLE
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
This value is stored in the cyBle_connectingTimeout global variable, which has a default value of 30. You can modify this variable directly within your application code before you start the connection request. Note this excerpt from the comment block defining the CyBle_GapcConnectDevice() API method:
* A procedure is considered to have timed out if a connection response packet is * not received within time set by cyBle_connectingTimeout global variable * (30 seconds by default). CYBLE_EVT_TIMEOUT event with CYBLE_GENERIC_TO parameter * will indicate about connection procedure timeout. Connection will automatically * be canceled and state will be changed to CYBLE_STATE_DISCONNECTED.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
This value is stored in the cyBle_connectingTimeout global variable, which has a default value of 30. You can modify this variable directly within your application code before you start the connection request. Note this excerpt from the comment block defining the CyBle_GapcConnectDevice() API method:
* A procedure is considered to have timed out if a connection response packet is * not received within time set by cyBle_connectingTimeout global variable * (30 seconds by default). CYBLE_EVT_TIMEOUT event with CYBLE_GENERIC_TO parameter * will indicate about connection procedure timeout. Connection will automatically * be canceled and state will be changed to CYBLE_STATE_DISCONNECTED.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you for information.....I will test it....:)