- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello.
I have file canproflash.pdf. It describes how to program the Fujitsu Flash Microcontrollers through a CAN interface. Whether there are sample of programs for this example somewhere? (Or implementation algorithm for UBS)
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The BootROM protocol is described here: http://www.cypress.com/file/243981/download
For MB966xx devices the protocol is slightly different, see 6.2.2 of the document mentioned above:
Calibrate off
MB96300: 0x00 0x55 0x87 0x00 0x78
MB96600: 0x00 0x55 0x00 0x87 0x00 0x78
It allows to program 'new/erase' device via serial interface.
#Holger
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
OK.
My request is missed.
What is located in Boot-ROM memory?
Whether it is possible to realize bootloader through boot-ROM? or there is other way?
This question about MB96690 Series.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The BootROM protocol is described here: http://www.cypress.com/file/243981/download
For MB966xx devices the protocol is slightly different, see 6.2.2 of the document mentioned above:
Calibrate off
MB96300: 0x00 0x55 0x87 0x00 0x78
MB96600: 0x00 0x55 0x00 0x87 0x00 0x78
It allows to program 'new/erase' device via serial interface.
#Holger
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
where could I get the Fujitsu MICROS CDROM, Version 3.1 ?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content