Please check the Interrupt,System ,Clock settings ( available in .cydwr file) from project in PC3.3 and set them same in PC4.0
No joy. All clock setup boxes and settings are identical! Changed some, put them back, still no joy.
Absolutely this should be a painless migration. Can you file a MyCase and make sure they collaborate me (Matt Landrum, firstname.lastname@example.org)?
One other question. Which version of the CAN Component are you using? 3.0?
This info is in the "Built-in" tab of the component configurator (double click on the component).
Sorry you are having this problem.
The developers have tried reproducing but can't. We really need a test case if possible.
Thanks for your attention to this matter. I've been (very) busy. This topic will be certainly more interesting in the near future because, due to TI terminating the Luminary LM3 parts (we were screwed), we'll be replacing the CPU with another (e.g. STM32, TI TM4C, etc.) - and it will be carefully chosen based on its ability to talk to the PSoC 5LP CAN transceivers. I'll let you know, directly, when I return to this topic soon. The problem hasn't gone anyplace ... but I'm not hurting because Creator 3.3 works just fine and 4.0 doesn't offer much for now except those make files I'm interested in ...
Okey doke. If/when you file a support ticket (or I can file one for you), let me know. Drop me an email at email@example.com. I have filed a CDT (Cypress Defect Tracking) with the tracking number of 258769. It has had some preliminary investigation done. You may want to refer to that.
Thanks for using PSoC!