I2C

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
lock attach
Attachments are accessible only for community members.
Anonymous
Not applicable

Hi,

   

I am trying to configure an I2C on the baseboard (CY8CKIT-042 -BLE) and need to check that on LCD.I am using CY8C4247LQI-BL483 which is an example code from the PSoC 4.

   

LCD simulation is not working on I2C " Can you provide some steps for this "

   

The below attached is the code and I have read the datasheet regarding the example program and when  I tried doing it with the SW2 which is on the baseboard,but it also didn't work.If I have to configure the switch SW2 from software only how we have to do that ? Can I know where I am missing.

   

Srujani

0 Likes
5 Replies
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

What is the LCD module you are using? (Link to datasheet)

   

 

   

Bob

0 Likes
Anonymous
Not applicable

hi

   

I am using character lcd with i2c interface.can you please share the link where i can find some videos for this.

   

thanks

0 Likes
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

LINK to datasheet is missing

   

 

   

Bob

0 Likes
lock attach
Attachments are accessible only for community members.
Anonymous
Not applicable

here is the attachment. for lcd using i2c

0 Likes
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

Probably we both are a bit off track due to language barrier.

   

You are using a PSoC4 BLE

   

You configured an I2C LCD component (that is software)

   

You need to connect a real I2C LCD module (that is hardware) to your PSoC

   

There is no "LCD simulation", so you will need to buy a real I2C LCD module. When you have got one, I would like to have a link to its datasheet.

   

 

   

Bob

0 Likes