- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
hi,
I am using the S6E2CC series controller i want to generate the clock from the timer module if any done this can you explain me (i want to generate the 16 ,25, 50 mhz frequency),
Best regards
Maheshwar
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
You can use a timer to divide the clock and output the signal on a pin but you need to GPIO Output Characteristics for the max output freq supported in the device datasheet.
http://www.cypress.com/file/235126/download
You can get the driver library here :
http://www.cypress.com/documentation/software-and-drivers/peripheral-driver-library-pdl
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
You can use a timer to divide the clock and output the signal on a pin but you need to GPIO Output Characteristics for the max output freq supported in the device datasheet.
http://www.cypress.com/file/235126/download
You can get the driver library here :
http://www.cypress.com/documentation/software-and-drivers/peripheral-driver-library-pdl
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
hi,
we wants to generate the ethernet clock out from the ECOUT pin in the S6E2CC controller to feed to the PHY, Also what are the changes we need to make to send a packet through the ethernet , we are using the stack given by th you.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
have you seen these examples?
http://www.cypress.com/documentation/software-and-drivers/software-example-demonstrate-lwip-fm4
http://www.cypress.com/documentation/software-and-drivers/software-example-running-freertos-fm4-lwip...
The ECOUT clock module can be enabled with symbol EMAC_ECOUT in emac_user.h.
But ... the jitter tolerance may be out of spec for most PHYs, so it is not recommended.
Regards,
Holger