I couldn't find Creator 1.0, but there are archives for older Creator versions (2.0 and above), check: http://www.cypress.com/documentation/software-and-drivers/psoc-creator-software-archive
Hope it helps
I notied the link but we need the PSOC Creator mentioned above.
We tried using the PSOC 3.0. The program don't show any error but it failed to work when we run the firmware. Same firmware without any changes, it works find with the old PSOC Creator.
There have many improvements been made in Creator 4.0 compared to the lower versions. Not only the user interface is much better now but there have been corrections made to the components to remove bugs. Which device is your customer using? (please exact part number).
Can you provide us with the not-working code so that we all can have a look at all of the settings. To do so, use
Creator->File->Create Workspace Bundle (minimal)
and attach the resulting file. I will try to find out the reason for not-running. So your customer will get a brand-new revision.
I have create a CASE and the engineer has provide the link to download the old PSOC Creator, Meantime we will till use the old PSOC Creator for the firmware have problem to migrate with higher or latest version
All the project we are using IC CY8C3866AXI-040.
We are not able to disclose the customer design.